Cummins QSB6.7 engine produces 152 horsepower. Coupled to the semi-automatic transmission, it generates class leading performance and is highly fuel efficient.
Four ram geometry delivers high torque for versatile performance on all applications.
Optional limited slip differentials on both the front and rear axles increase traction in poor conditions.
The optional Smooth Ride System reduces machine bounce, increases productive capacity and improves operator comfort during load and carry cycles.
Available with high lift loader arms for loading high sided vehicles.
Long-Life Durability
Quality design and heavy-duty construction result in a rugged machine built for a long productive life.
Multi-plate, oil immersed disc brakes are mounted in wheel hubs to eliminate damage from abrasive materials and to minimize maintenance requirement.
Load sensed hydraulics reduce wear and minimize fuel consumption by delivering oil only on demand.
Steering cylinders are mounted high on the mainframe for greater protection against the elements.
Operator Comfort
Ergonomically designed cab includes a fully adjustable seat and steering column for greater comfort and minimal fatigue.
The cab is pressurized with positive filtration to keep the air clean. Optional air conditioning helps maintain a dust-free and comfortable environment.
A low noise level in the cab minimizes operator fatigue.
Automatic return to dig, with kickout on lift, helps reduce operator fatigue. Single lever servo hydraulic controls, with integrated transmission kickdown and disconnect, further add to ease of use.
The automatic transmission with manual over ride ensures real ease of operation for more productive machine utilization.
Serviceability
Sealed bucket pins only require greasing every 100 hours.
Electronic Monitoring System (EMS) constantly checks machine performance and warns of any potential system failure. It includes a data logging and downloading capacity.
All servicing points and major components are easy to access.
Available factory installed auto greasing system protects the machine in even the most extreme applications
GENERAL INFORMATION
Manufacturer
JCB
Model Year
2010
Model
426HT
MSRP
Request a Quote
DIMENSIONS
Length
22 ft. 5 in. (6,831 mm)
Height
10 ft. 11 in. (3,335 mm)
Width
8 ft. 2 in. (2,482 mm)
Weight
28,000 lbs. (12,700 kg)
Wheelbase
9 ft. 8 in. (3,000 mm)
Ground Clearance
1 ft. 5 in. (442 mm)
Turning Radius
Inside: 9 ft. 7 in. (2,920 mm)
Maximum: 19 ft. (5,790 mm)
Twin variable displacement piston pumps feed a "load sensing" system providing a fuel efficient and responsive distribution of power as required
Reserve Capacity
55 gal. (210 l)
Std Pump Flow
35 gpm (132 lpm)
OPERATIONAL
Rated Operating Load
28,841 lbs. (13,080 kg)
Tipping Load
23,210 lbs. (10,526 kg)
Bucket Capacity
2.4 cu. yd. (1.8 cu. m)
Height to Bucket Pin
12 ft. 10 in. (3,906 mm)
Dump Height
9 ft. 3 in. (2,831 mm)
Dump Reach
6 ft. (1,828 mm)
Dump Angle
49°
Bucket Breakout Force
31,000 ft. lbs. (138 kN)
Total Cycle Time
Arms Raise: 4.4 sec.
Bucket Dump: 1 sec.
Arms Lower: 2.7 sec.
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Specs, Quotes, Overview
